CTEK’s new CC3 chargepoint

EV fleets urged to futureproof their charging installs

Fleet operators installing or expanding their own Electric Vehicle (EV) charging are being urged to futureproof their installations by being capable of providing Autocharge for their EV drivers and also being ready for the future innovation of Plug & Charge.

Both Autocharge and Plug & Charge promise a ‘zero touch’ streamlined charging experience for EV drivers, who will simply plug in to a chargepoint which will automatically communicate with the vehicle and, if a payment method has been previously set up, begin charging.

One difference is that Autocharge requires the driver or fleet operator to pre-register the vehicle with the charging network’s backend or use an RFID card or authenticate via an app, but only for the first charge.

CTEK’s new CC3 chargepoint

CTEK’s new CC3 chargepoint. Image: CTEK

Autocharge is already in some European countries, and although availability in the UK is still limited it is growing. Some charging networks are installing Autocharge-compatible chargepoints and educating consumers on how to register for Autocharge and the advantages they will enjoy.

Autocharge relies on the Open Charge Point Protocol (OCPP) which enables communication between the chargepoint and the backend management systems. Fleet operators should be installing chargepoints, such as CTEK’s new CC3, that support the latest OCPP standard, 2.0.1, in order to stay ahead.

Plug & Charge can be seen as the next step beyond Autocharge. For the EV driver, the experience will be even more streamlined. The vehicle’s identifying data is securely stored within the car itself and recognised by any compatible charging station. You don’t need prior registration with specific charging networks. The EV drivers simply plug in and automatically charge time after time.

Daniel Forsberg, Marketing Manager EVSE at CTEK

Daniel Forsberg, Marketing Manager EVSE at CTEK. Image: CTEK

For the fleet operator, Plug & Charge promises enhanced security using encryption, digital signatures and public key infrastructure. This will add additional protection for information about the EV, its owner and their financial payment details.

Plug & Charge’s protocols are defined by the ISO 15118 standard. As more EVs are built Plug & Charge-ready, fleet operators with charging also need to be specifying chargepoints that are ISO 15118 compatible.

Both Autocharge and Plug & Charge will streamline administration for fleet operators, reducing overheads. Autocharge is a smaller step for fleet operators with charging, easier to implement than full Plug & Charge but, unless a vehicle is pre-registered to the backend, can still require physical authentication devices for first use such as RFID readers.

It makes sense for operators to now be looking to install chargepoints which enable both Autocharge and Plug & Charge by both supporting OCPP 2.0.1 and meeting ISO 15118.

The ISO 15118 compatible chargepoints, such as CTEK’s CC3, will not only enable Plug & Charge but will also unlock the other innovations governed by the standard, including Vehicle-to-Grid (V2G) and Vehicle-to-Everything (V2X), paving the way for smarter energy management.

Autocharge and Plug & Charge are not just for rapid DC charging, they are also ideal for AC charging which fleet operators may install for overnight charging.


Author: Daniel Forsberg, Marketing Manager EVSE at CTEK

 

Comments are closed.